Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Pedals

Bontrager Line Elite MTB Pedal
$49.99
MTB flat pedals with a durable nylon design and replaceable pins for consistent grip. Confident and durable Most downhillers, dirt jumpers, and enduro riders prefer flat pedals, but any trail rider can appreciate the benefits of the Line Elite MTB pedal. It features a durable nylon body and solid platform with replaceable traction pins, so every time you place your foot your shoe stays put. It also has a durable axle and sealed cartridge bearings to ensure lasting performance. - Durable nylon body with a proven shape for comfort and confidence - Durable axle spins on sealed cartridge bearings - Replaceable steel traction pins - Install with either 6mm hex or standard 15mm pedal wrench - Spindle diameter: 9/16-inch
Shimano PD-EH500 Pedals
$79.99
PD-EH500 pedals FEATURE - One side SPD, the other side flat - Light action binding makes frequent stepping-in & out easier - Better grip on flat side for wet condition BENEFIT - Convenient road touring pedal - Optimized for urban riding - Multi-condition - Best match with CT or MT shoes
Crank Brothers Stamp 7 Pedals
$150.00
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)
Origin8 Ultim8 Slimline Platform
$90.99
Origin-8's Ultim8 Slimline Platform pedals feature ultra-light and thin forged 6061-aluminum platforms, heat-treated chromoly axles, and cartridge bearings for a super grippy, ultra-smooth, lightweight and reliably tough set of pedals. They also have replaceable pins. - 9/16-inch - Weight: 276 grams
Bontrager Comp Road Pedal
$79.99
Get ready to ride Take your riding to the next level with Bontrager Comp road pedals. A fully-adjustable release tension lets you dial in the right feel for your ride and adds the confidence and efficiency of a secure connection to your bike. Durable materials and sealed cartridge bearings ensure lasting performance for this Look Keo-style pedal. Cleats and hardware included. - Road pedals with Look KEO-style compatibility - Durable Chromoly spindle for long-lasting durability - Sealed cartridge bearings provide smooth, reliable feel - Adjustable release tension - Includes cleats and mounting hardware - Spindle diameter: 9/16-inch - Weight: 282g
Shimano PD-R540 SPD-SL Pedals
$59.99
Shimano's PD-R540 Pedals are fine pedals at a great value. Entry and exit is natural so you'll have no trouble starting and stopping. And, when you're clipped in you'll pedal with more power and comfort. The R540s are light, too, so they make a nice upgrade. - Weight: 330 grams (pair)
Crank Brothers Candy 1
$59.99
Crankbrothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud shedding capability, and customizable float and release angles create a dialed-in feel. Spindle material: Forged scm 435 chromoly steel Body material: One piece composite Wing material: Stamped steel Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 294g per pair Warranty: 5 years
Bontrager Comp MTB Pedal
$89.99
Get ready to ride Take your riding to the next level with Bontrager Comp MTB pedals. A fully adjustable release tension lets you dial in the right feel for your ride and adds the confidence and efficiency of a secure connection to your bike. Durable materials and sealed cartridge bearings ensure lasting performance for this SPD-compatible pedal. Cleats and hardware included. - MTB pedals with dual sided SPD-compatible engagement - Durable Chromoly spindle for long-lasting durability - Sealed cartridge bearings provide smooth, reliable feel - Adjustable release tension - Includes cleats and mounting hardware - Spindle: 9/16-inch
Crank Brothers Double Shot 2 Pedals
$89.99 - $99.99
You've got flat shoes and shoes with cleats. Are you really gonna let your pedals tell you which ones you can wear? Crank Brothers' hybrid-style Double Shot is a flat and clipless pedal to suit your every pedaling whim. Molded pins and ribs offer superior grip, and diamond plate pads are supremely tactile. You've got entry from either side of the pedal, so that's two chances per revolution to catch. Thanks to the wide, platform-style body, though, you'll keep moving even if you don't. Specifications: - spindle material: forged scm 435 chromoly steel - body material: A380 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - cleat: premium brass cleats with shims included - weight: 395g per pair
HT Pedals X2 DH Race Pedals
$169.00
To create its new X2 DH clipless pedals, HT Components started with the effective design of its X1 downhill pedals. The X1's platform was altered to make the X2's easier to get in and out of with a wider variety of shoes. The X2 uses a thinner, 14mm platform than the X1's to allow them to be more responsive, and it uses a slimmer cage design on the CNC-machined body. - Platform:85 X 94 X 14mm - EVO+ bearings with single DU bushing per side - 5 replaceable pins - High spring tension - 9/16"
Crank Brothers Mallet 2 Pedals
$99.99
The Mallet 2 pedal from Crank Brothers is ready to drop the hammer. No, seriously, this thing has been redesigned and rebuilt from the ground up, and it's a whole new creature. Durability and a lightweight aluminum body take the center stage in this versatile pedal that's equally at home shredding singletrack and providing a platform for your sneakers while you ride to class. The Mallet 2 offers a flat pedal feel and clipped-in control simultaneously for the best of both worlds and performance you can feel. And, with a customizable float and release angle, your body will thank you with miles and miles of fun.
Garmin Vector 3S Upgrade Pedal
$499.99
Upgrade your Vector 3S to a dual-sensing power meter, and step beyond watts to see exactly how your pedaling style generates the force that moves you. When paired with Vector 3S, the upgrade pedal completes the Vector power meter system, providing left/right balance data and cycling dynamics. With the new podless design, it installs like any other bike pedal. Revolutionary cycling dynamics show you exactly where you’re generating power throughout the pedal stroke. See where you apply force on the pedal to ensure proper cleat position. The upgrade pedal also tracks when and how long you were seated versus standing so you can gauge position effectiveness.
Shimano PD-GR500 Multi-Purpose Flat Pedal
$69.99
Get rad without getting broke. This Multi-Purpose Flat Pedal from Shimano has a wide platform and adjustable pin height to dial in the perfect amount of grip for your preference and riding conditions. - 3 different pin height settings to match different type of riding - 9 pins per platform - Highest setting is+5 mm higher than PD-MX80's pins - Weight: 533g
Crank Brothers Eggbeater 11
$450.00
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and they feature 6-degrees of knee-friendly float. The Eggbeater 11s boast titanium axles, wings, and bodies, stainless-steel springs, and inner needle bearings. Crank Brothers has also made the Eggbeater internals water-tight for excellent durability and consistently smooth pedaling.
Shimano PD-R540-LA Light Action SPD-SL Pedals
$59.99
- Lighter spring action version of PD-R540 - Wide platform for a more efficient transfer of power - Wide bearing placement for stable, uniform load distribution - Low maintenance sealed cartridge axle unit - Adjustable entry and release tension settings - The legacy of Shimano Design, Quality and Performance - Weight: 330 grams (pair)
Shimano PD-R550 SPD-SL Pedals
$99.99
Shimano's PD-R550 SPD-SL Pedals offer wide, stable platforms for great support and stability when you're out on the road. An extra-wide platform maximizes power transfer. Durable stainless steel tread plates reduce flex and pedal body wear. Wide bearing placement provides uniform load distribution for miles and miles of riding. - 310 grams (pair)
HT Pedals T1-SX BMX-SX Pedals
$175.00
The T1-SX BMX pedal offers excellent spring tension and feel. Unclipping under maximum load is a thing of the past with the T1-SX's hook plate techology. EVO+ bearing system featuring IGUS bushings keeps these pedals running smoothly. - 68 x 84 x 17mm - 9/16"
Crank Brothers Mallet 1
$69.99
Crank Brothers' Mallet 1 pedals sport the company's super easy to enter/exit 4-sided cages with wide polycarbonate platforms for great support and stability, and tough chromoly axles for durability. All this adds up to pedals that are ideal for downhill riding and free riding. The open design quickly sheds mud for reliability in sloppy conditions and the traction pins grip like champs when you're riding clipped out between corners.
Crank Brothers Candy 1
$59.99
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years
Giant EXT Tec MTB Pedals
$24.99
Giant's EXT Tec MTB Pedals are a great way to add nice pedals with toe clips and straps to your mountain bike. They feature light and durable nylon bodies with toothed aluminum cages for an excellent grip. They have tough heat-treated boron steel axles, quality bearings, and rustproof nylon toe clips with nylon straps are included. There are also reflectors for visibility. - 9/16-inch spindles
Dimension City Pedals
$17.99
Dimension City Pedals. - Built-in reflectors, will not accept toe clips - Molded nylon; 1-piece, caged-type pedal - Slip-resistant surface
Crank Brothers Candy 7 Pedals
$169.00
Competition-oriented and customizable for refined fit, feel, and power transfer. Details - Durable alloy body - Durable cast steel wings - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - Hex alloy endcap and bashguard - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system Specs - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 52mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 320g per pair - Wing Material: 17-4PH stainless
Black Ops Torqlite UL Pedals
$142.79
Torqlite UL Pedals feature a CNC machined ultra-light body with an incredibly thin 17mm platform for extra clearance. - Large platform for extra stability - Hardened chromoly replaceable pins - Heat-treated chromoly spindle - Sealed cartridge bearings - Spindle size: 9/16-inch - 395g/pair
Origin8 Vex Platform
$56.99
- Pedal body made of ruggedly durable engineering-grade thermoplastic - LSL sleeve bushing and sealed bearing - 9/16" CNC machined Chromoly spindle - 10 M3-8mm replaceable pins per side - Platform size: 113mm x 105mm - 350g per pair
Sunlite MTB Single-Sided Clipless Pedals
$50.00
Sunlite's MTB Single-Sided Clipless Pedals are perfect for people who who use 1 bike to do it all. On one side you've got regular flats that work with any shoes. This side is perfect for quick errands and short rides. The other side is SPD compatible for long commutes and weekend rides. We like them for beginning mountain bikers trying new stuff. Get to a sketchy section that you're afraid to try clipped in, the aggressive tread keeps your foot in place while being able to put a foot down if you need to. - 9/16" spindle
Race Face Ride Pedal
$44.99
The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance. - Molded traction pins give you all the grip you need without risk of damaging your shoes or shins - Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts - 9/16"
Dimension Mountain Basic Heavy-Duty Pedals
$14.99
Dimension Mountain Basic Pedals. - Molded nylon 1-piece, caged-type pedal with reflectors - Accepts toe clips - Hang tag packaging - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 330g
Crank Brothers Mallet E Pedals
$169.00
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair
Bontrager Satellite City Pedal
$29.99
Comfort and Confidence The inForm BioDynamic design of the Satellite city pedal delivers ultimate pedaling comfort. The wide, stable platform is designed to support your foot while you're pedaling, and the grippy texture provides confident traction to keep you going. Reflector wrap on each pedal ensures all-around visibility. - Large, concave platform for support and stability - Anti-slip texture for traction and confidence - 270-degree reflectivity for all-around visibility - inForm BioDynamic design for comfort and support while pedaling - Spindle: 9/16-inch
Sunlite Clipless 1 Pedals
$53.59
Sunlite's Clipless I Pedals are perfect for people who who use 1 bike to do it all. On one side you've got a flat side that works with any shoes. This side is perfect for quick errands and short rides. The other side is SPD compatible for long commutes and weekend rides. Now your pedals can do it all as well. - 9/16" spindle
Page 1 of 2 Next page