Filter By:
Parts & Accessories

$6.99
Fits between cage and frame and allows water bottle cage to twist sideways for easier bottle removal and replacement. Works with most Topeak water bottle cages.
- Material: Engineering grade plastic
- Size: 7.9 x 2.5 x 1.5 cm / 3.1” x 1” x 0.6”
- Weight: 25 grams

$9.99
On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage.
-45mm of adjustability
-28 oz water bottles max
-Constructed of AL-6061

$9.50
- Individually packaged
- Enables mounting of a bottle cage in a variety of positions
- Fits 22.2-26.0mm handlebars

$7.50
CamelBak's Big Bite Valve mouthpiece offers hands-free hydration and is ideal for any application. And, it's remarkably drip resistant.

$7.50
CamelBak's Big Bite Valve Cover keeps your bite valve clean. Put it on your valve for storage or while traveling and your bite valve will stay just the way you left it.

$33.00
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks.
- Offers 20% more water per sip
- Leak-proof cap is easier to open and close
- On/off lever lets you seal your drinking tube shut with one hand
- Hydroguard technology inhibits the growth of bacteria in the reservoir and tube
- Big bite valve self-seals after each drink, eliminating annoying drips
- Dimensions: 30 x 18 x 6 cm/ 12 x 7 x 2.5 in

$37.00
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks.
- Offers 20% more water per sip
- Leak-proof cap is easier to open and close
- On/off lever lets you seal your drinking tube shut with one hand
- Hydroguard technology inhibits the growth of bacteria in the reservoir and tube
- Big bite valve self-seals after each drink, eliminating annoying drips
- Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in

$12.00
The Crux reservoir on/off valve pairs with CamelBak's Big Bite valve and tune. Using an integrated valve, water flow shuts off for added security during transport.

$7.50
CamelBak's Ergo HydroLock controls your fluid flow with the flip of a switch. Turn it on to drink, turn it off for added security during transport. Simply insert it into the end of your CamelBak drinking tube and attach the valve to the other end. Plus, the 90-degree bend makes sipping on the go a cinch!

$12.00
Our improved bite valve design delivers 25% more flow. The universal cap is leak-proof when closed and spill-proof when open, features an easy carry handle, and is compatible with Chute Mag and Hot Cap vessels.

$19.95
The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved.
- Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment
- Designed to be easily flipped to provide either left or right hand bottle access
- Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset
- Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

$17.95
Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump.
- Material: Engineering grade plastic
- Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge
- Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I
- Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3”
- Weight: 30 grams / 1.06 oz
*Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included

$74.95
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails.
- Material: CNC aluminum
- Hydration Capacity: One or two bottles (up to 750cc each)
- Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series
- Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails
- Max Load: 2.5 kg / 5.5 lb
- Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included
- Angle adjustable
- Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9”
- Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)

$59.95
Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs.
- Material: Pressed aluminum
- Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails
- Hydration Capacity: One or two bottles (up to 750cc each)
- Max Load: 2.5 kg / 5.5 lb
- Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage
- Added Feature: 2 angle positions
- Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7”
- Weight: 97 grams

$17.99
- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars
- Compatible with handlebars from 22mm to 36mm

$8.95
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

$11.49
Show your love for bicycles, tools and all things Park Tool with their Coffee Mug. Perfect for impressing your guests with a cool-logo cup, or fueling yourself before a fun wrenching session, a few of these mugs should be in every kitchen cabinet and bicycle workshop, too!

$7.95
Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.

$8.95
Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

$19.99
Increase your hydration capacity with Origin-8's HydroRail Double Seat Bracket. This bracket mounts to your saddle rails and holds two bottle cages. And, the angle is fully adjstable so you can customize it to keep your bottles within easy reach. Bottles and cages sold separately.

$9.99
Clamp your water bottle cage securely to your handlebars with Electra's Bottle Cage Adapter. Easy installation and universal bottle cage compatibility make this accessory a no-brainer.
• Allows for the installation of bottle cages on bicycles without frame mounts
• Mounts to handlebar
• Bottle cage sold separately

$38.00
Update or replace your lumbar reservoir. This 2-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 70-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking.
- 2L / 70 oz Dakine x Hydrapak 3D lumbar reservoir
- Blaster high-flow bite valve w/shut-off
- Quick-disconnect tubing for easier refills
- Molded 3D bottom provides better shape inside the pack
- Molded 3D bottom for much better drying between rides

$42.00
Update or replace your lumbar reservoir. This 3-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 100-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking.
- 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect
- Blaster high-flow bite valve w/ shut-off
- Quick-disconnect tubing for easier refills
- Molded 3D bottom provides better shape inside pack
- Molded 3D bottom for much better drying between rides
Page 1 of 2
Next page