Brakes/Levers/Pads

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

Smooth, controlled braking is yours with Avid's HS1 Rotor. It utilizes cross-drilled technology to dissipate heat, save weight, and give you a consistent feel at the lever and predictable speed control in all conditions.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.

- High Performance Brake Pads - Disc Pad Material: Organic

- Forged aluminum arms - 102mm arm length - 158g

- Mountain-bike shifters built into linear pull-compatible brake levers - Aluminum - Left: triple chainring; Right: 8-speed - Cables and housing included

•Mountain and road touring cantilever design •Forged aluminum construction •Linear spring with quick tool adjust •185g each

- Designed for linear-pull V-brakes - Pulls two brake cables with one lever - Forged alloy construction - 3 finger - 136 grams each

•Designed for cantilever & caliper brakes •22.2mm (7/8") clamp •Forged alloy construction •4 finger •205g pair

- Side-pull design - Includes lever, caliper, cable, and housing - 53-71mm reach - 330g per set

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

- Bulldog-style long-reach side pull brake - Forged alloy construction - Rear caliper only - 238g each

- Standard replacement cantilever/v-brake bosses

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- Alloy 135mm V-brakes for front or rear applications - Linear pull, front or rear compatibility - Dual spring tension adjustment

•Designed for cantilever & caliper brakes •22.2mm (7/8") clamp •Constructed from steel and nylon •4 finger •217g pair

•Side pull brake •Includes lever, caliper, cable and housing •Steel

• Side pull brake • Includes levers, calipers, cables and housing • Aluminum

- Basic replacement rotor for everday use - One piece stainless steel construction - 6 bolt - Hardware included - 160mm

•Designed for cantilever & caliper brakes •Aluminum construction •2.5 finger •22.2mm (7/8") clamp •171g pair •SHIMANO Equivalent BL-R550 / BL-3500

- Economical 3-finger replacement brake levers for basic replacement and repairs - Large 3-finger length blade offers an easy to engage platform and universal practicality - Available for Canti and linear-pull-style brakes

•Side pull brake •Includes lever, caliper, cable and housing •Forged aluminum construction •Includes replacement bolt for mounting on fork

•Compatible with most road caliper brakes •All weather compound

• Side pull caliper design • Includes levers, calipers, cable and housing • Steel construction • 780g set

- Forged alloy construction - 3-finger length - Compatible with caliper and cantilever brakes

• Compatible with many older caliper brakes • Flat top design metal pad holder • All weather pad compound

• DIN standard design with anti-corrosion hardware • All weather compound • Centered post

• All weather compound • Cantilever post style • Black • 52mm

• Designed for caliper & cantilever brakes • Steel construction • 22.2mm (7/8") clamp • 200 grams pair

Double your braking options with Sunlite's Type 1 Top-Mount Cross Levers. They fit neatly on top of your bars and they're a great way to gain more control on technical cyclocross courses and everywhere else you choose to ride. They're made of aluminum and boast a built-in reach adjustment.

• Compatible with most cantilever and u-brake systems • Allen head type • All weather compound

• Compatible with most side pull and center pull brakes • All weather compound

- Compatible with most side- and center-pull brakes - Excellent for BMX and freestyle - Hex nut type - All-weather compound

BL-M4100 - Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever BR-MT410 - Long-lasting performance and quick - Easy installation and adjustment - Superior modulation gives you the power you need - Quick piston retraction - Lightweight 2-piston disc brake caliper - Pre-assembled and bled brake lever and caliper, with SM-BH59-SS hose & mineral oil - Without rotor and adapter - One-way bleeding system

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

- Shimano, BR-M575, E01S, Metal disc brake pads, pair, E-type, Y8FL98010

- Shimano, SM-RT66 Rotor, 220mm, ISO - Stainless steel rotor

With comfortable hoods and lightweight aluminum levers, SRAM's 500 Single Speed Brake Levers are the perfect choice for your non-geared bike. Even if you don't run gears, you can still get all the renowned ergonomic, high-level SRAM lever function.

With comfortable hoods and lightweight aluminum levers, SRAM's S500 Single Speed Brake Levers are the perfect choice for your non-geared bike. Even if you don't run gears, you can still get all the renowned ergonomic, high-level SRAM lever function.

SRAM's 500 TT ergonomic brake levers slice the wind and make a great addition to any aerodynamic speed machine. The return springs provide a solid feel and help prevent brake drag, while the aluminum levers offer pinpoint control for maximum stopping power. Plus, the internal cable routing gives a clean look and top aerodynamics.

Just because you eschew gears doesn't mean you're willing to settle for heavy, retro brake levers. Welcome to single speed paradise with SRAM's 900 Single Speed Brake Levers. The unidirectional carbon levers are impressively light and SRAM's renowned ergonomic hoods are always comfy. Set up your single speed rig right with SRAM's 900 brake levers.

The built-in adjustability of SRAM's 990 Aero Brake Levers makes it easy to achieve your preferred braking feel on almost any aerobar setup. A turn of a 2mm Allen key frees the lever to spin, allowing the user to make up to 8mm’s of inward or outward adjustment to their brake calipers. Such wide adjustability makes it easy to fine-tune hard to reach brakes on the most innovative triathlon and time trial machines.

The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter the Apex 1 HYDROR. Using SRAM's proven HYDROR braking system, the Apex 1 delivers quiet confidence on every ride. - Uses DOT 5.1 brake fluid - Lever body design offers excellent finger wrap, comfort, and control - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Two piston hydraulic caliper - Moto-style means this is a left-side lever with a rear brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter the Apex 1 HYDROR. Using SRAM's proven HYDROR braking system, the Apex 1 delivers quiet confidence on every ride. Mated to a HYDROR brake lever is a DoubleTap 11-speed shift lever, built to provide accurate shifting that you can rely on no matter where you ride. - SRAM Road ExactActuation 11-speed compatible - Uses DOT 5.1 brake fluid - Caliper available in both 74mm and Flat Mount versions - Lever body design offers excellent finger wrap, comfort and control - Easily converts between 160mm and 140mm rotors with adaptor brackets - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Two piston hydraulic caliper - Moto-style means this is a right-side (rear) shifter with a front brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

When you choose to ride, advancement means having a group that’s always ready. Apex 1 is that group. As a left lever for your Apex 1 setup, or paired for single speed adventures, the Apex mechanical brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. - ErgoFit design from SRAM RED improves grip and finger wrap - Reach Adjust for a perfect fit - Durable, forged aluminum lever blade with laser texture for a positive touch

SRAM's Apex Brake Caliper is forged from aluminum for low weight and high strength. SRAM's powerful dual-pivot design offers excellent stopping power and great modulation. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick release and adjustment barrel too.

Bolt on SRAM's Apex Pad & Holder for excellent braking. The holder design makes it easy to switch pads—meaning this system is great for road and cyclocross bikes alike!

As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. SRAM Reach Adjust feature brings near universal fit for riders. - Weight: 260 grams per lever (no cables) - Lever Material: Aluminum - Finish: Black - Adjustment: Reach Adjust

SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.

CenterLine X rotors are the lighter weight version of SRAM's quiet, smooth, and robust CenterLine rotors. The CenterLine X rotor features a two-piece design with an alloy center and steel brake track. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Lightweight, two-piece design - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: 6-bolt - Includes Steel rotor bolts

The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight - Includes stainless steel rotor bolts

The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs - Compatible with both road and mountain bike brakes - Includes steel rotor bolts

Sleek, easy to use, yet immensely powerful. Code R packs a winning punch with a reliable DirectLink lever mated to Code’s new oversized four-piston caliper. SRAM’s signature ergonomics are supplemented by the tool-free reach adjust for a fit to each riders’ needs, to unleash Code’s superior braking power, consistency, and modulation. - Four aluminum pistons provide the stopping power and excellent heat management - Stainless steel heat shield breaks the thermal connection between the brakes pads and the caliper body, which reduces fluid temperature - Forged aluminum lever body and blade - Bleeding Edge design for easier maintenance - Includes steel-backed sintered metal pads

- Disc brake caliber assembly - Assembled - No hose - Code R B1/RSC A1

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.

- Simple, robust, powerful brake for riders who prefer to work with Mineral oil. - The lever is designed with proven lever technologies and features easy adjustment access and superior ergonomic comfort. - The caliper is based on the Code downhill brake and utilizes the same pads. - Post-mount. - Designed for use with Maxima Mineral Oil only.